Pilot scale demonstration of thermal treatment for the remediation of PFAS contaminated soil - Review of key outcomes

Environmental project, no. 2320, October 2026

The Danish Environmental Protection Agency has funded the implementation of pilot tests for demonstration of thermal remediation of PFAS contaminated soil. The demonstration projects have been anchored in the Capital Region of Denmark.

Two thermal methods have been tested. Both projects demonstrated that Thermal Conductive Heating (TCH) effectively remediates PFAS in soil. All treated samples met the Danish soil quality criteria. Soil heated to at least 350°C showed no detectable PFAS compounds, while samples heated to 250–300°C retained low residual concentrations. A target temperature of 350°C is therefore recommended.

The two methods used different energy sources and gas management approaches. Both are likely to destroy PFAS, reducing the need for post-treatment.

Both methods are considered ready for full-scale testing. In Denmark, treatment will likely involve excavating soil and treating it on-site in piles. To achieve economic competitiveness with conventional disposal, batch sizes exceeding 1,000 tonnes are required.

Thermal treatment is particularly suitable for PFAS hotspots and clayey soils, where soil washing is unsuitable. It may also offer a more sustainable alternative to landfilling by destroying PFAS rather than relocating the contamination. However, treating all lightly contaminated soil thermally is unrealistic given the large number of potentially affected sites in Denmark.

View the report here